Tineco CARPET ONE Serie Mode D'emploi page 28

16 Brush Roller Cover
17 Humidity Sensor
18 Carpet Deodorizing & Cleaning Solution
19 Cleaning Tool
20 2 in 1 Nozzle
21 Sponge Filter
22 Brush Cover Scraper
23 Accessory Hose
24 Accessory Hose Icon
25 DWT Full or Blocked
Dirt Monitoring Loop
26
(Blue to red according to the dirt amount)
27 AUTO Mode
28 CWT Empty
29 Brush Roller Tangled Indicator
30 Dryness Indicator
31 Tineco Logo
32 Water Spray Volume Indicator
Fig.A
ASSEMBLY
How to Assemble/Disassemble
• To assemble the handle, insert it into the
appliance until you hear a "click".
Fig.B-1
• In the event that the handle needs to be
disassembled, press the spring to release the
handle with a tool (like a screwdriver) and lift
the released handle from the appliance.
Fig.B-2
• Wrap the power cord around the cord hooks
for convenient storage.
Fig.B-3
Clean Water Tank
• Press the CWT handle to remove it.
Fig.B-4
• Open the tank cap, add two bottle caps of
solution to the CWT, then fill with tap water to
the Max line and tightly close the cap.
Fig.B-5
Note:
Only use water under 140°F/60°C.
DO NOT USE HOT WATER.
• Install the Clean Water Tank into the appliance.
You should hear a "click" if done correctly.
Fig.B-6
Dirty Water Tank
• Install the Dirty Water Tank into the appliance.
You should hear a "click" if done correctly.
Fig.B-7
Accessory Hose & 2 in 1 Nozzle
• Choose suitable brush head according to the
usage scenario.
Fig.B-8
• Pull it up to uncover the accessory connection
port.
Fig.B-9
• Insert the hose end into the port. You should
hear two "clicks" if done correctly.
Fig.B-10
OPERATION
Preparing for Use (Appliance)
1.Unwrap the power cord and plug into an
electrical outlet.
Fig.C-1
2.Step on the recline pedal to recline the unit to
cleaning position.
Tips:
• Press the
prompt.
• Press the
languages. (More voice languages will be
added, please refer to the actual product for
now.)
Fig.C-2
3.Press the button and the appliance will start
in AUTO mode by default. Press it again to turn
off the appliance. Switch between AUTO, MAX
and DRY mode by pressing the
Fig.C-3
4.In AUTO/MAX/DRY mode, the appliance will
stop working when put uprightly and start
26
button to turn on/off the voice
button twice to switch
button.