AL-KO Solo 4852 VS ALU Mode D'emploi page 26

GB
Wheel drive (optional)
Adjusting the Bowden cable
If the wheel drive can no longer be switched on or off
while the motor- is running, the related Bowden cable
needs to be adjusted.
Caution!
Adjust the Bowden cable only when the motor is
switched off.
1. Turn the adjuster on the Bowden cable in the
direction of the arrow (
2. To test the cable setting, switch on the motor and
switch on the wheel drive.
3. If the wheel drive is still not working, the lawnmower
must be taken to a service point or an authorised
specialist.
Lubricating the drive pinion
From time to time, lubricate the drive pinion on the
transmission shaft
The wheel drive gearing is maintenance free.
26
20).
Storage
Caution - risk of explosion!
Do not store the equipment where there are
Allow the motor to cool down
Store the equipment in an area which is kept dry,
and which cannot be accessed by children or
unauthorised persons
Store the starter battery where it will be protected
from frost
Recharge the starter battery from time to time
Drain the fuel tank
Follow the instructions of the manufacturer of the
motor.
Pull out the spark plug connector
Repairs
Repairs should be carried out only by a service point or
an authorised specialist.
Disposal
Do not dispose of old equipment,
batteries or accumulators as household
waste!
Machine, packaging, and accessories were made
with recyclable materials, and should be disposed of
.
accordingly
Translation of original user instructions
Petrol lawnmower