Publicité
Les langues disponibles
Les langues disponibles
5.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/
/
indicator is on, there is a risk
of burns from residual heat.
The indicators appear when a cooking
zone is hot. They show the level of the
residual heat for the cooking zones you
are currently using:
- continue cooking,
- keep warm,
- residual heat.
The indicator may also appear:
• for the neighbouring cooking zones
even if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the
cooking zone has cooled down.
5.5 Activating and deactivating
the outer rings
You can manually adjust the cooking
surface to the dimensions of the
cookware.
Set a heat setting for the cooking zone.
Choose the symbol dedicated to the
cooking zone:
.
To activate the outer ring: touch the
symbol. The indicator appears.
To deactivate the outer ring: touch the
symbol until the indicator disappears.
5.6 Timer
• Count Down Timer
You can use this function to set the
length of a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
As long as the
To activate the function or change the
time: touch
or
the time (00 - 99 minutes). When the
indicator of the cooking zone starts to
flash, the time counts down.
To see the remaining time: touch
set the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To deactivate the function: touch
set the cooking zone and then touch
The remaining time counts down to 00.
The indicator of the cooking zone
disappears.
When the countdown ends,
an acoustic signal sounds
and 00 flashes. The cooking
zone deactivates.
To stop the sound: touch
• Minute Minder
You can use this function when the hob
is activated and the cooking zones do
not operate. The heat setting display
shows
.
To activate the function: touch
then touch
or
the time. When the time finishes, an
acoustic signal sounds and 00 flashes.
To stop the sound: touch
To deactivate the function: touch
and then touch
. The remaining time
counts down to 00.
The function has no effect
on the operation of the
cooking zones.
5.7 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other
symbols on the control panels are
locked.
The function does not stop the timer
functions.
ENGLISH
11
of the timer to set
to
to
.
.
and
of the timer to set
.
Publicité
