Publicité
Les langues disponibles
Les langues disponibles
Connections
Speaker Components
SCREW (5
20): 12EA
X
(L)
(R)
FRONT
SURROUND
Installing the Speakers on the Tallboy Stand
1. Turn the Stand Base upside-down and
connect it to the Stand.
2. Use the driver to combine the screws (5x20)
on the 3 marked holes.
3. Straighten a supplied speaker wire and put in
the hole on the center of Stand Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw (5x15) clockwise into the hole
on the rear of the speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
16
|
English
HT-E5350_ZC_ENG_0316.indd 16
HT-E5350_ZC_ENG_0316.indd 16
SPEAKER CABLE
(L)
(R)
STAND
CENTER
STAND BASE
1
Stand Base
2
Stand
3
4
5
6
SCREW (5
15): 4EA
X
SUBWOOFER
Speaker
Stand
2012-03-16 오후 3:30:46
2012-03-16 오후 3:30:46
Publicité
