10
English
Modes and intensities
Modes (Specific models only)
Depending on your model, your Cordless Power
Flosser is equipped with either one or two different
modes. If you have a device with two modes, press the
mode button to toggle between standard clean mode
and deep clean mode to select your desired mode. If
you have a device with one mode, it is already in the
clean mode.
Clean
This mode, with pacer, provides constant water
pressure for a great clean.
The pacer indicates when you are supposed to move
to the next section of your mouth via a short pause in
the waterflow every 15 seconds.
This Cordless Power Flosser comes with the pacer
activated.
To activate or deactivate the pacer
With the Cordless Power Flosser off, press and hold
the intensity selection button for 3 seconds.
- When deactivated, the battery indicator light will
flash amber once
- When activated, the battery indicator light will flash
green twice
Deep clean:
This mode utilizes Pulse Wave technology, to guide
you tooth by tooth, using strong and gentle pulses of
water for a thorough clean.
With Pulse Wave technology the flow of the water
increases and decreases in intensity, providing a brief
pause during which you can move the nozzle to the
next space between your teeth.