SEVERIN GS 8864 Mode D'emploi page 23

1. Loosen the four screw covers and the
screws on the lid of the appliance. Re-
move the appliance cover and put it away.
Loosen the three screws holding the top
door hinge and remove the hinge.
2. Lift the appliance door a little and remove
it from the bottom door hinge. Put the
door aside in a safe place.
3. Tilt the appliance slightly backwards and
unscrew the front adjustable feet from
the appliance.
4. Loosen the screws holding the bottom
door hinge and remove the door hinge.
5. Loosen the nut securing the pin to the
bottom door hinge and fit the pin with a
washer into the other hole. Fix the pin
with the nut.
6. Tighten the bottom door hinge securely on
the other side of the appliance.
(Lower part of the door)
7. Remove the screw on the door stop and
screw it back on the other side of the
appliance door.
8. Fit the appliance door onto the bearing
pin of the bottom door hinge and press it
gently against the appliance.
9. Swap the position of the door bushing
and hole cover on the top of the appliance
door.
- 23 -