SEVERIN GS 8864 Mode D'emploi page 24

10. Align the door. Insert the top door hinge
with the bearing pin into the bushing on
the top of the door and tighten it firmly.
11. Replace the appliance cover and tighten it
securely.
12. Replace the lid of the appliance, screw it
tight and replace the screw covers.
13. Finally, check the correct alignment of the
door. Make sure it is tightly sealed on all
sides. If necessary, align the front feet of
the appliance, so they are in a horizontal
position.
If the appliance has been tilted more than
30°, wait 4 hours before connecting it to
the mains.
Disposal
Appliances that are marked with this
symbol have to be disposed of
separately from household rubbish.
These appliances contain valuable resources
that can be recycled. A correct waste disposal
protects the environment and the health of
those around you. To get informed about it,
either defer to your municipal administration
or the retailer.
• Pull the mains plug out of the socket and
disconnect it from the appliance before
getting rid of it.
• The cooling medium Isobutane
(R600a) and the propellant in the
isolation Cyclopentane (C 5 H 10 )
are inflammable substances,
thus, need to be appropriately disposed of.
• Make sure the tubes of the cooling circuit
don't get damaged before the proper
disposal.
- 24 -