Troubleshooting - Springlane Chuck Mode D'emploi

assembly with a soft cloth. Let the
plastic jar dry at air. Re-assemble
Power cord, plug, and motor must not get in touch with water.
Be aware of sharp blades when cleaning the blades and the plastic
jar.

TROUBLESHOOTING

Please check the following steps if the device does not work properly:
1. Check if the manual was followed precisely and correctly.
2. Check the following table for possible reasons.
3. Check if your fuses are working.
PROBLEM
The device is especially noisy and/or
vibrates noticeable.
Liquid is coming from bottom of the
filled plastic jar.
The device cannot be turned on.
20
the blades for the next use.
SOLUTION
Check if the blades are impaired by
damaged or missing parts and replace
them if necessary.
Check if the device is connected cor-
rectly to the plug.
Check if the switches are clean and
movable.