USE HIGH PERFORMANCE BLENDER CHUCK
1. Prepare the ingredients according
to the recipe. Especially heavy and
solid ingredients must be minced
before adding into the plastic jar.
2. Put the device onto a dry and level
area and detach the mixing jug
from the motor block.
3. Remove the lid and fill the pla-
stic jar with the ingredients. We
recommend adding solid ingre-
dients before liquid ones.
4. Make sure not to exceed the maxi-
mum capacity.
5. Place the lid on the jug and turn
it clock-wise until latching. Do not
use the blender without latched
lid.
6. Place the jug on the motor block.
Make sure it is connected properly.
7. The speed can be adjusted from
LOW to HIGH with the rotary
knob.
8. Plug the power plug in, choose
the speed via the rotary knob and
start operation via the ON/OFF
switch.
18
9. Turn the switch to OFF for turning
the mixer off.
10. The device has a „PULSE" function.
To use the PULSE switch push it
and keep it pushed. In this mode,
the device runs on maximum
speed (28,000 rpm), until the
switch is released.
11. If the mixer is idling although
it is filled, switch off the device,
remove the plastic jar and try to
remove the ingredients from the
plastic jar's sides. Use wood or
plastic kitchen tools.
12. Let the motor stop completely
before removing the plastic jar.
Never detach it when the motor
is still running or the mixer is still
switched on.
13. If you are finished using the mixer,
pull the plug and clean the plastic
jar and the single parts.