Publicité
Les langues disponibles
Les langues disponibles
Wiring connection
IMPORTANT
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to professionals
for your safety. Consult your car audio dealer.
Vehicle dashboard
Factory wiring
harness (vehicle)
Custom wiring harness
(separately purchased)
*
1
Firmly connect the ground
wire of the amplifier to
the car's chassis to avoid
damaging the unit.
*
2
You can also connect a
subwoofer speaker directly
using this lead without an
external subwoofer amplifier.
For setting, 10.
Recommended connection
Front output
Rear/subwoofer output
Light blue/yellow
To the steering wheel
remote control adapter
STEERING
WHEEL
REMOTE
Blue: To power antenna
Blue/white: To amplifier
Signal cord (not supplied)
Antenna terminal
Join the same color wires together.
Blue/white: Remote (200 mA max.)
Orange/white: Illumination
Brown: Tel muting
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker (right)
Gray/black
White: Front speaker (left)
White/black
Purple: Rear speaker (right)
Purple/black
2
Green: Rear speaker (left) *
2
Green/black *
1
JVC Amplifier *
Fuse (10 A)
Remote wire
(not supplied)
Ignition switch
Car fuse block
Separate red wire
Make this connection if your vehicle
factory wiring harness does not have
"12 V ignition switch" wire.
ENGLISH
17
Publicité
