Publicité
Les langues disponibles
Les langues disponibles
AUDIO SETTINGS
Other settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
EQ SETTING
EQ PRESET
Select a preset equalizer suitable to the music genre. (Select [USER] to use the
settings made in [EASY EQ].)
FLAT (default) / HARD ROCK / HIP HOP / JAZZ / POP / R&B / TALK / USER /
VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE
EASY EQ
Adjust your own sound settings. The settings are stored to [USER].
SUB.W SP *
*
1
2
:
00 to +06
SUB.W *
1
*
3
:
–08 to +08
BASS LVL:
–06 to +06
MID LVL:
–06 to +06
TRE LVL:
–06 to +06
1 BASS / MIDDLE / TREBLE: Select a sound tone.
PRO EQ
2 Adjust the sound elements of the selected sound tone.
BASS
Frequency: 60/ 80/ 100/ 200 HZ
Level:
Q:
MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 KHZ
Level:
Q:
TREBLE
Frequency: 10.0/ 12.5/ 15.0/ 17.5 KHZ (Default: 10.0 KHZ
Level:
Q:
.
Default: XX
(Default: 03
00
00
00
00)
(Default: 80 HZ
–06 to +06
Q1.0/ Q1.25/ Q1.5/ Q2.0
(Default: 1.0 KHZ
–06 to +06
Q0.75/ Q1.0/ Q1.25
–06 to +06
Q FIX
AUDIO
BASS BOOST
+01 — +05 (+01): Selects your preferred bass boost level. ;
OFF: Cancels.
LOUD
01 / 02: Boosts low or high frequencies to produce a well-balanced
sound at low volume. ; OFF: Cancels.
SUB.W LEVEL *
1
SPK-OUT *
PRE-OUT *
SUB.W *
3
ON / OFF: Turns on or off the subwoofer output.
SUB.W LPF *
1
THROUGH: All signals are sent to the subwoofer. ; LOW 55HZ /
MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than
55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer.
SUB.W PHASE *
1
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[SUB.W LPF].)
FADER
R06 — F06 (00): Adjusts the front and rear speaker output balance.
BALANCE *
4
L06 — R06 (00): Adjusts the left and right speaker output balance.
VOL ADJUST
–15 — +06 (00): Preset the initial volume level of each source
(compared to the FM volume level). Before adjustment, select the
00
source you want to adjust. ("VOL ADJ FIX" appears if FM is selected.)
Q1.0)
*
1
Displayed only when [SUB.W] is set to [ON].
*
2
Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 10)
00
*
3
Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W]. ( 10)
Q1.25)
*
4
This adjustment will not affect the subwoofer output.
00
Q FIX)
2
00 to +06 (+03): Adjusts the output level of the
subwoofer connected via speaker lead. ( 17)
3
–08 to +08 (00): Adjusts the output level of the
subwoofer connected to the lineout terminals (REAR/
SW) through an external amplifier. ( 17)
ENGLISH
9
Publicité
