Chauvin Arnoux C.A 6681 Notice De Fonctionnement page 45

2.2.2 LCD SCREEN
Fig.5
2.2.3 EXAMPLES OF DISPLAY IN CABLE DETECTION MODE
(1) Automatic mode
(3) Mains voltage identification mode
C.A 6681 Cable locater
(1) Symbol indicating that the receiver batteries
are dead and must be replaced.
(2) Symbol indicating that the transmitter battery
is dead and must be replaced.
(3) Received signal level (Level I, II, or III).
(4) Manual mode symbol.
(5) Automatic mode symbol.
(6) In automatic mode, this number indicates the
strength of the signal; in manual mode, this
location displays either "SEL", to indicate that
there is no signal, or a value indicating the
strength of the signal; in UAC mode, "UAC" is
displayed.
(7) Concentric circles indicating the preset
sensitivity in graphic form. A large number of
circles indicates high sensitivity, while a small
number indicates a lower sensitivity.
(8) Code received.
(9) Strength of the received signal.
(10) Voltage present symbol.
(11) Silent mode symbol.
(2) Manual mode
Fig.6
Fig.8
English
Fig.7
45