emerio FN-110001 Mode D'emploi page 5

PARTS DESCRIPTION
1. Handle
2. Speed switch
3. Fan guard
4. Fan blade
5. Fan body
OPERATING INSTRUCTIONS
1. Plug the power cord into a suitable socket.
2. Flip the speed switch on top to turn on the fan ("I" = low speed, "II" = high speed).
3. To turn the fan off, flip the switch to the "0" position.
CLEANING
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and dry it carefully. Always take out the mains plug first.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption:
Eco design requirements
Product information requirements
Maximum fan flow rate (F)
Fan power input (P)
Service value (SV)
Measurement standard for service value
Standby power consumption (PSB)
Fan sound power level (LWA)
Maximum air velocity (c)
Contact details for obtaining more information
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective
product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs
by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can't claim any form of warranty. Damage caused by not following the instruction manual,
- 4 -
25W
11,8 m³/min
16,1 W
0,7 (m³/min)/W
IEC 60879: 1986 (corr.1992)
0.0 W
49 dB(A)
1,7 meters/sec
Emerio Deutschland GmbH
Höfferweg 14
51519 Odenthal
Germany
FN-110001 / FN-110001.4 / FN-110001.5