Eaton EU xComfort CSAP-01/03 Instructions De Montage page 7

We, EATON Industries (Austria) GmbH
declare that product (family)
Eaton - Plug in adapter - dimming,
CDAP-...
(the declaration of conformity applies to all
listed types within our actual product catalog)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and "good engineering practices"
complies with the provisions of Council directive(s):
based on compliance with European standard(s):
tested by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark: 2005
Doc.Id.: CDAP-...
CTAA-01/01
CTAA-02/01
CBEU-02/01
CSAU-01/01
CBEU-02/02
CJAU-01/01
CDAU-01/01
CRCA-00/01
CHSZ-00/01
Declaration of Conformity
3943 Schrems, Eugenia 1
Austria
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
Radio and Telecommunications Terminal Equipment 99/05/EC
RoHS Directive 2011/65/EU
EN301489-3 V1.6.1, EN300220-2 V2.4.1, EN50491-5-1/10, EN50491-5-
2/10, EN62479/10, EN50428/05 + A1/07 + A2/09, EN55015/13,
EN61547/09, IEC60884-2-5/95
Heinz Ursprunger
Director Product Line
& Marketing Management
3
01.12.2014
Friedrich Schröder
Director Quality
& EHS
RF- SYSTEM
BASIC - MODE - CARD