Quick Start - Parrot Bebop-Pro 3D Modeling Guide D'utilisation

QUICK START

This guide will enable you to handle Parrot Bebop
2 quickly. For more detailed information go to the
Support section on our site www.parrot.com/support/
CHARGING THE PARROT BEBOP 2
BATTERY
1. Take the plug (supplied) appropriate to your
country and plug it into the charger.
2. Connect the supplied cable to the charger.
3. Connect the battery to the charger's cable, and
then plug the charger into the mains. The warning
light is red while charging and then turns green
when the battery is charged. The battery charge
time is approximately 55 minutes. Flying time is
approximately 25 minutes.
> N.B.: If the charger's warning light blinks red,
contact Parrot after-sales or your dealer.
For any questions relating to the battery visit
www.parrot.com/support
CHARGING PARROT
SKYCONTROLLER 2
1. Take the adapter appropriate to your country and
fix it on the charger.
2. Connect the charger cable to Parrot Skycontroller
2, then plug the charger into the mains.
8