Parrot Bebop-Pro 3D Modeling Guide D'utilisation page 13

CALIBRATION
You are advised to calibrate the drone regularly with
the FreeFlight Pro application.
If the application displays a window requesting drone
calibration, follow the steps shown on the screen.
You can also calibrate the drone manually:
1. Select Fly & Film in the Freeflight Pro application.
2. Press
Settings, then Piloting and Calibration.
3. Follow the on-screen animation.
> The animation disappears when calibration is
completed; you can then start the flight plan on
Pix4Dcapture.
IMPLEMENTING A
FLIGHT PLAN WITH
PIX4DCAPTURE
1. Turn on your Parrot Bebop 2 and connect your
smartphone to the USB port of Parrot Skycontroller 2.
2. Launch the Pix4Dcapture application.
3. Create the flight plan to be implemented (refer to
section Create a flight plan)
4. Press START.
> An automatic checklist is drawn up. If all the items
have been validated the application proposes
takeoff by pressing the green takeoff button.
13