Orbegozo SF 0441 Manuel D'instructions page 10

SF 0441
DESCRIPTION
1. Front grille
2. Drawer
3. Blades
4. Nut
5. Rear grille
6. gear button
7. motor casing
8. Button panel
9. Tightening screw
10. inner tube
11. Height adjustment ring
12. Base
13. 7 screw
INSTALLATION INSTRUCTIONS
1. Install the tube (10) on the base (12) and tighten it with the screw at 7 (13). Choose the desired height of
the inner tube and adjust it by tightening the height adjustment ring (11).
2. Insert the inner tube (10) into the fan body and tighten the screw (9) so that it is fixed to the post.
3. Place the rear grille (5) on the front of the engine. Tighten the plastic nut (4) to secure the grille. Insert
the blade (3) into the motor shaft and screw on the spinner (2). Place the retaining ring on the front
grille (1) and then join the two grilles together using it. Tighten the retaining ring screw so that both
grilles are secure.
FUNCTIONING
- BUTTON PANEL (4 BUTTONS)
From top to bottom:
3. High Speed
2. Average Speed
1. Low Speed
0. Shut down
10