Publicité
Les langues disponibles
Les langues disponibles
Cleaning
To ensure continued excellent performance by this product, periodic cleaning is recommended.
Panasonic Friendly Recommendations to Customer
To increase the life of the lamp used in your Product please consider the following recommendations:
1) After turning the power to OFF position please wait at least 5 minutes to allow the lamp to cool down before
turning it back ON.
2) Avoid continuously turning the unit ON and OFF.
3) Avoid connecting the unit to an AC outlet wired to wall switch. Do not power off the unit by using the wall
switch in case it is the only connection available.
4) For more information about your product maintenance please contact our Panasonic Customer Care Center
at:
Canada:
Telephone #:
1-800 #:
Fax #:
Email link:
IMPORTANT WARNING IN CASE OF LAMP REPLACEMENT:
Please ship the defective lamp back to Parts Department:
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga On L4W 2T3
70
All manuals and user guides at all-guides.com
The unit contains many
plastic parts. For this reason
DO NOT use benzine,
thinner or other chemicals to
clean the unit.
DO NOT bring into contact
with insecticide or other
volatile substances. DO
NOT allow the unit to come
into contact for extended
periods with rubber or vinyl
products.
(905) 624-5505
1-800-561-5505
(905) 238-2360
"Customer support" on www.panasonic.ca
Dust will accumulate on the picture
screen. Please wipe with a soft
cloth from time to time. If you use a
chemically treated cloth, please be
careful to follow the instructions that
come with the cloth.
Remove dirt and soiling by wiping
with a light cloth. Even if the unit is
heavily soiled, do not apply cleaner
directly to the unit. Soak a cloth in a
solution of neutral cleanser diluted
with water. Then wring out the cloth,
wipe the unit clean, and finish by
wiping with a dry cloth. Do not use
any type of cleansers on the picture
screen.
Publicité
