RGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed
correctly, or a black background may be displayed. In this case, "signal" will flash on-screen for about 5
seconds.
Mode type
VGA400 (70 Hz)
VGA480 (60 Hz)
SVGA (60 Hz)
* XGA (60 Hz)
* Signal will be compressed to fit the display.
Notes:
• Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.
• The D-SUB15P connector can accept RGB (H-V sync separate).
• When an external video processor/scaler is used, it must have RGB (H-V sync separate) output.
All manuals and user guides at all-guides.com
Signal data
No. of dots
Horizontal frequency
(H × V)
(kHz)
640 × 400
31.47
640 × 480
31.47
800 × 600
37.88
1 024 × 768
48.36
Information menu
Vertical frequency
display
(Hz)
70.08
VGA400
59.94
VGA
60.32
SVGA
60.00
XGA
21