Publicité
Les langues disponibles
Les langues disponibles
6 Limitations on Use
Intended Life
A local risk assessment should be carried out based upon activity and usage.
Environment
Avoid exposing the device to corrosive elements such as acids, industrial detergents, bleach or
chlorine. The use of creams or lotions with this device should be used with caution as these can
cause the device to soften and overstretch or distort.
Keep away from sharp objects (such as jewelery,
fingernails).
Exclusively for use between -15 ˚C and 50 ˚C (5 ˚F to
122 ˚F).
7 Choosing the Correct Size
It is important that the correct size is specified to ensure
proper fit and comfort in use.
1.
Measure the circumference of the residual limb
4 cm up from its distal end.
2.
If the circumference of the residual limb matches
one of the sizes in the table, choose the next size
down.
3.
If the circumference of the residual limb is between
one of the sizes in the table, choose the smaller size.
Circumference
Measured (cm)
Available Sizes
Valve Size
(Locking Liner)
8 Trimming the Device
The device may be trimmed to suit as required but never bellow the socket trim line.
We recommend using a rotating disc cutter to achieve a bevelled edge.
Leave enough material on the device so that its proximal edge can cover the edge of the socket.
Trim the proximal edge of the device to suit the shape of the user's socket.
If necessary, trim the proximal edge of the device in a wave pattern to reduce shear stress.
Where possible try to avoid abrupt changes of contour and sharp edges which could
cause tears in the silicone and fabric.
22.2-
23.6-
25.1-
23.5
25
26.5
22
23.5
25
Small
26.6-
28.1-
30.1-
28
30
32
26.5
28
30
Medium
8
32.1-
34.1-
36.1-
34
36
40
32
34
36
Large
Extra Large
938335PK1/3-0123
4 cm
40.1-
42
40
Publicité
