Télécharger Imprimer la page

Blatchford Silcare Active SATTCP22-SATTCP40 Instructions D'utilisation page 12

Revêtement en silicone

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Liability
The manufacturer recommends using the device only under the specified conditions and for
the intended purposes. The device must be maintained according to the instructions for use
supplied with the device. The manufacturer is not liable for any adverse outcome caused by any
component combinations that were not authorized by them.
CE Conformity
This product meets the requirements of the European Regulation EU 2017/745 for medical
devices. This product has been classified as a class I device according to the classification rules
outlined in Annex VIII of the regulation. The EU declaration of conformity certificate is available at
the following internet address: www.blatchford.co.uk
Single Patient – multiple use
Medical Device
Compatibility
Combination with Blatchford branded products is approved based on testing in accordance
with relevant standards and the MDR including structural test, dimensional compatibility and
monitored field performance.
Combination with alternative CE marked products must be carried out in view of a documented
local risk assessment carried out by a Practitioner.
Warranty
The device is warranted for 6 months from original date of purchase unless otherwise stated. See
Blatchford catalogue for details.
Reporting of Serious Incidents
In the unlikely event of a serious incident occurring in relation to this device it should be
reported to the manufacturer and your national competent authority.
Environmental Aspects
This product is fabricated from silicone rubber and fabric that cannot be easily recycled: please
dispose of it responsibly as general waste, as per local waste handling regulations.
Retaining the Packaging Label
You are advised to keep the packaging label as a record of the device supplied.
Trademark Acknowledgments
Silcare and Blatchford are registered trademarks of Blatchford Products Limited.
Manufacturer's Registered Address
Blatchford Products Limited, Lister Road, Basingstoke RG22 4AH, UK.
12
938335PK1/3-0123

Publicité

loading

Ce manuel est également adapté pour:

Silcare active sattlp22-sattlp40