Télécharger Imprimer la page

Panasonic QUICKDRAW MC-V5268 Mode D'emploi page 24

Publicité

Always operate vacuum with genuine Panasonic Type U3 Standard or U6 Electrostatic dust
bags installed. Panasonic dust bags may be purchased through any authorized Panasonic
dealer or ordered from service company.
Groove
Ranura
Ouverture
Changing Dust Bag
1)
➢ ➢ Pull outward on dust cover grip to
2)
➢ ➢ Remove dust bag by grasping
3)
➢ ➢ Spread out new dust bag, taking care
4)
➢ ➢ Attach new dust bag onto bag holder
5)
➢ ➢ Reinsert tab on end of dust cover
6)
➢ ➢ Rotate dust cover up into closed
- 24 -
remove the dust cover.
cardboard portion and pulling out.
not to tear bag.
by holding cardboard portion and
pushing back.
into groove on dust compartment to
allow cover to rotate closed.
position and press into place without
pinching dust bag.

Publicité

loading