Hansgrohe C 042210 Serie Instructions D'installation page 4


2.
1.
1.
2.
English
Installation
Remove the label (1).
Close the stops using a 4 mm
Allen wrench (2).
Cut the plaster shield so that it extends ¹⁄₁₆" - ⅛"
from the finished wall surface.
Seal the wall around the
plaster shield with waterproof
sealant (1).
Failure to seal the wall
can lead to possible water
damage.
Remove the flush insert screw, flush insert, and
seals (2).
closed
open