Publicité
Les langues disponibles
Les langues disponibles
BIPRO450 BUILT-IN INSTRUCTIONS
4 x N570-0086 (#14 X1/2")
N080-0213
N570-0086
N715-0080
This grill is designed for masonry, NON-COMBUSTIBLE enclosures only, and must be installed and serviced by a qualified
installer to local codes.
1. Attach side mounting brackets to each side of the grill using #14 x 1/2" screws (N570-0086).
2. Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be applied to each wing of
the rear trim.
3. Lower the unit in place, the wings on the rear trim should be under the side mounting brackets. Connect the flex supply line
to the fitting at the end of the manifold.
4. The entire installation must be leak tested before operating the unit.
W445-0031
3/8"(10mm)
N570-0086
N080-0213
N010-0281
N010-0568
www.napoleongrills.com
21
Publicité
