Waeco AirCon Service Center ASC5000 Notice D'utilisation page 85

ASC5000, ASC5000G
8.2.2 Entering user codes
When you switch on the air conditioning service station, the unit data
appears in the display. If a user code has been created, the same code
must be used to enable the station.
1. Enter the correct user code.
If you enter an incorrect user code, the following error message
appears:
Once the correct code is entered, the station is enabled and it starts
up. The user's name is displayed:
EN
ENTER USER CODE
WRONG CODE
John Citizen
Operation
----
85