Waeco AirCon Service Center ASC5000 Notice D'utilisation page 72

Initial start-up
The following message then appears:
✓ Afterwards the AirConServiceCenter runs a software test.
✓ Afterwards a leak test is performed.
✓ When the start-up procedure is complete, the AirConServiceCenter
displays the following:
I
NOTE
Ignore any error codes which occur during commissioning (see
page 116) and skip by pressing ENTER.
7.3 Standby menu
The standby menu shows you the current supply quantities and the time
settings of the AirConServiceCenter.
The following information is shown:
 Refrigerant quantity
 Fresh oil quantity
 UV additive quantity
 Time
 Date
72
Internal vessel
pressure
Please wait
Software test.
Please wait
Tightness test
Please wait
Refrigerant
PAG oil
UV tracer
11:56:35
ASC5000, ASC5000G
g. XXXX
ml XXX
ml XXX
10/03/15
EN