Grounding / Double Insulation Instructions - Nilfisk Advance Adgility UZ964 Mode D'emploi

GROUNDING / DOUBLE INSULATION INSTRUCTIONS

GROUNDING INSTRUCTIONS
(USA, Canada)
Applicable to machines with a three-pin plug
This appliance must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This
appliance is equipped with a cord having an equipment-
grounding conductor and grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and
ordinances.
DANGER!
Improper connection of an equipment-grounding conductor
can result in risk of electric shock. Check with qualified
electrician or service person if you are in doubt as to whether
the outlet is properly grounded, Do not modify the plug
provided with the appliance. If it will not fit the outlet, have
proper outlet installed by a qualified technician.
This appliance is for use on a nominal 120 volt circuit and has
a grounding plug that looks like the plug illustrated in Figure
A. A temporary adaptor which looks like the adaptor illustra-
ted in Figure B may be used to connect this plug to a two-pole
receptacle, as shown, if a properly grounded outlet is not
available. The temporary adaptor should be used only until
a properly grounded outlet, Figure A, can be installed by a
qualified electrician. The green colored rigid ear, lug, or the
like extending from the adaptor must be connected to a
permanent ground such as a properly grounded outlet box
cover. Whenever the adaptor is used, it must be held in place
by a metal screw.
NOTE! This temporary adaptor is not
permitted in Canada
FIGURE A
GROUNDED OUTLET
BOX
GROUNDING BLADE IS LONGEST
OF THE THREE BLADES
SERVICING OF DOUBLE-INSULATED
APPLIANCES
Applicable to machines with a two-pin plug
In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means is
provided on a double-insulated appliance, nor should a
meand for grounding be added to the appliance. Servicing a
double-insulated appliance requires extreme care and know-
ledge of the system, and should be done only by qualified
service personnel. Replacement parts for a double-insula-
ted appliance must be identical to the parts they replace. A
double insulated appliance is marked with the words
"DOUBLE INSULATION" or
"DOUBLE INSULATED."
The symbol (square within a square) may also be used on
the product.
To obtain consistent performance over the life of your
vacuum, read through these instructions and keep them
handy for future reference. If you require service, contact the
dealer from whom the vacuum was purchased, or the local
authorized Service Station. Always refer to your Service
Station for complete service information, For prompt and
complete service information, always refer to the model,
type and serial number indicated on the rating plate.
IMPORTANT
If the supply cord of this appliance is damaged, it must be
replaced by a repair shop appointed by the manufacturer as
special purpose tools are required.
FIGURE B
ADAPTOR
M E T A L
SCREW
GROUNDING
TAB
G R O U N D E D
OUTLET
BOX
7