BAFFLE
Repeat on the opposite side of the mower.
Lift the deck and slide forward to detach the deck clip
from the J-hook.
Slide the deck out from under the mower.
INSTALLING THE BAFFLE
See figures 3 - 5.
Line the studs on the baffle with the holes on the under-
side of the deck as shown.
NOTE: The mulch baffle will only fit in the correct position.
Attach the baffle studs with the locknuts, tighten securely.
Reattach the cutting deck to the tractor, making sure to
reconnect the power cables.
INSTALLING THE MULCHING PLUG
See Figure 6.
NOTE: When using the mulching plug, do not install the
grass catcher.
Lift the side discharge chute.
Align the slot on the mulch plug with the tab on the deck.
Attached the straps on each side of the mulch plug to the
tabs on each side of the discharge opening.
Lower the side discharge chute.
Reinstall the start key when you are ready to mow.
999000221
3-13-23 (REV:01)
STUDS
HOLES
Fig. 4
TTI OUTDOOR POWER EQUIPMENT, INC.
P.O. Box 1288, Anderson, SC 29622
1-800-525-2579 www.ryobitools.com
LOCK
NUTS
SIDE
DISCHARGE
CHUTE
SIDE
DISCHARGE
OPENING
STRAP
English
TAB
SLOT
MULCH
PLUG
STRAP
Fig. 5
Fig. 6