Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
fridge compartment and -18°C in the freezer
respectively.
Let pre-cooked foods cool down before placing
them in the fridge or freezer. This will prevent
the internal temperature of the fridge from
rising.
Keep your fridge full, but not over crowded, this
helps reduce «cold» air loss. Meanwhile, avoid
overloading the fridge or freezer. Try to leave
about 20% free space for air circulation.
To prevent cold air escaping, limit the frequency
of opening door. When retuning from shopping,
sort foods to be kept in your fridge before
opening the door. Only open the door to put
food in or take it out.
Make sure the door seal is clean and in good
condition. It should hold a piece of paper tightly
in place when shut.
Defrost regularly or when ice is more than
5mm thick. Thick ice covering the inner sides
significantly increases energy use.
The combination of the drawers, baskets and
shelves shown in the device description is
GB-20
optimal for efficient energy savings. Changing
the combination proposition could alter the
efficiency.
INSTALLATION
This refrigerator can be opened either from the
left or right side. The default way of opening the
door is from the right side. If you want to open
the door from the left side, please follow the
instructions below.
Tools Required: Phillips style screwdriver / Flat
blated screwdriver / Hexagonal spanner
• If you want to have the door swing reversed,
we recommend that you contact a qualified
technician. You should only try to reverse
the door yourself if you believe that you are
qualified to do so.
• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest
position.
• To take the door off it is necessary to tilt the
unit backwards. You should rest the unit on
something solid so that it will not slip during
the door reversing process.
• All parts removed must be saved to do the
ENGLISH
GB-21
Publicité
