Publicité
Les langues disponibles
Les langues disponibles
How to reverse the door
TooI required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
•
Ensure the unit is unplugged and empty.
•
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
•
All parts removed must be saved to do the reinstallation of the door.
•
Do not lay the unit flat as this may damage the coolant system.
•
It's better that 2 people handle the unit during assembly.
1. Unscrew the top hinge. Then lift the upper door and place it on a padded surface to avoid scratching.
2. Remove bottom hinge pin from right to left.
3. Unscrew top hinge pin from the hinge. Then turn the hinge over and screw hinge pin.
4. Re-fit the door and then upper hinge on left side. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally tightening the upper hinge. If
necessary, a spanner to tighten the hinge.
5. Detach the Fridge door gaskets and then attach them after rotating.
Publicité
