Télécharger Imprimer la page

GE Profile PLU612RW Guide D'utilisation Et Instructions D'installation page 18

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting Tips ...
Problem
Surface burners do not light or do not
light fully.
Flames are completely or mostly yellow
or orange.
when light button is pressed.
Possible Cause/Solution
Ensure any gas supply valves and propane tank valve are opened. If
air is in the supply line, it may take up to a minute for the air to purge
and the burner to light.
the clicking of the ignition system when the knob is pressed. Continue
pressing for at least 5 seconds until the flame sensor is heated
Gas pressure is either too low or too high.
Cleaning section.
Moisture is present on the burner. With burner off and cool, dry burner
thoroughly.
of flickering orange due to dust particles in the gas or air.
Gas pressure is too low.
Cleaning section.
Installation Instructions.
service.
49-2001565 Rev. 0

Publicité

loading