EN
all the burners on « MAX ». Doing this will clean all the elements of any residue left during the production
process.
WARNING : If you smell gas, turn off the gas source and lift the lid of the barbecue.
LIGHTING THE LATERAL BURNER
1. Remove the cover from the side burner and make sure the switch is in the «OFF» position.
2. Open the gas valve and wait a few seconds.
3. Press and hold the control button for the side burner and turn it anti-clockwise, positioning it to
«MAX» to light the flame. Repeat this various times if necessary.
4. If this ignition process doesn't work, turn the button back to «OFF» and wait a few minutes, then
repeat the previous steps or try to ignite the burner with a match.
5. Once the initial burner has been lit, repeat stage no. 3 to light the other burners.
6. Adjust the flame to the desired strength, with the aid of the control switch.
SWITCHING YOUR BARBECUE OFF
1. Shut the gas valve, directly at the cylinder.
2. Then, when the flames are extinguished, turn all the switches «OFF».
3. For maximum safety when not in use, you can also disconnect the pipe from the gas cylinder.
28
17/11/2022