holzkraft HWS 505 K Traduction Des Instructions D'origine page 28

Work information
Cutting height Spar
Piece of wood
Firewood
Specific noise values
The according to the EN 23746 for the sound pressure level resp. EN 31202 (correction factor k3 after supplement A.2 from EN
31204 calculated) for the sound pressure level on the working site ascertained noise emission value amounts under the foundations
of ISO 7904 supplement a performed working conditions to.
Sound pressure level in dB
Idle L / Processing L
WA WA
Sound pressure level on working site in dB
Idle LqAeq / Processing LqAeq
The specified values are emission values and therefore should not at the same time be reliable working site values. Although there
is a correlation between emission and immision levels, it cannot unfailingly be derived if extra precautions need to be taken or not.
Factors, which influence the actual availabe immusion value on working site, include the peculiarities of working area, other sources
of noise, e.g. the number of machines and other adjoining processes. The allowed working values could vary from country to coun-
try. However, the information should qualify the user, to be able to make an estimation of the dangers and risks.
7. Scope of delivery
Remove all the parts from the box and check these for completeness (p.2). Remove all transport protection present.
1. Base frame with swivel, motor and switch
2. Wrench with locking pin
3. Rear strut
4. Foot, rear left and right
5. Saw blade
6. Strut, left and right
7. Wheel, 2 units
8. - 13. Accessories bag enclosed
14. Protective hood, assembled
15. Guard bracket
16. Protective cover
17. Swivel protection, 2 units
18. Protective flap
8-13 Accessories bag enclosed, containing:
29x lenticular flange head screw M8x16
29x locking nut M 8
2x hexagon screw M6
2x locking nut M6
2x washer D 20 mm
2x lock washer without cap D 18 mm
2x locking nut M 4
2x fillister head screw M 4x610
1x cover panel with clinch stud
2x plastic wascher
1x pivot bushing, galvanised
1x hexagon nut, self-locking M 6
1x hexagon screw M 5x12
1x collar bushing
1x hexagon nut, self-locking M5
4x mushroom head screw M6x12
4x washer D6
4x hexagon nut, self-locking M6
page: 28
min. mm
max. mm
max. mm
Reserve technical changes!
GB
170
1200
240 x 190
98 / 104
89 / 95
(Fig. 8a)
(Fig. 8b)
(Fig. 9a)
(Fig. 9b)
(Fig. 10)
(Fig. 11)
(Fig. 12a)
(Fig. 12b)
(Fig. 13a)
(Fig. 13b)
(Fig. 13c)
(Fig. 13d)
(Fig. 13e)
(Fig. 13g)
(Fig. 13h)
(Fig. 17a)
(Fig. 17b)
(Fig. 17c)