Télécharger Imprimer la page

Grandin LD40SGB201 Mode D'emploi page 75

Publicité

Les langues disponibles

Les langues disponibles

Media Player
Before operating MEDIA menu, plug in USB device, then press
SOURCE button to set the input source to Media.
Press ◄/► button to highlight your preferred submenu: Photo, Music,
Movie and e-Book, press OK button to confirm.
Basic operation for photo, music and movie:
1) RED: Delete highlighted files.
2) GREEN: Add/remove all the files to play list
3) OK: Add/remove highlighted file from play list.
4) CH+/-: Page up/down
5) Press ► button to start playing.
Remark: Depending on the capacity of the device, the reading can take
more than 1 minute before launching the video.
The unit cannot read my USB device.
- Once you have plugged your device to the unit, you may need to
switch on the USB device before it can operate.
- This unit does not support a direct USB connection with a computer.
You need to use a USB device, a MP3 player or a PMP (Portable
Multimedia Player with hard disk).
- If you are using a USB external hard disk: you need to connect your
device. simultaneously to an external power source and to the unit. If
you are using a self-powered PMP, make sure that the battery is
sufficiently loaded.
- Check that the files system of your USB device is formatted into the
FAT 32 format. USB device formatted into NTFS are not compatible
with this unit. Caution: if you attempt to modify your file system,
formatting your device will erase all data. Please refer to your USB
device's instruction manual first.
- Warning: Connect your USB device directly to the USB port of the
device. Using an extension cable is not recommended and may
cause interference and failure of data transfer.
All manuals and user guides at all-guides.com
EN-33

Publicité

loading