Télécharger Imprimer la page

Nuna Pipa Urbn Mode D'emploi page 12

Masquer les pouces Voir aussi pour Pipa Urbn:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
2
- Rotate ISOFIX Connectors down (22). This also lowers the recline bar,
which helps position the child restraint at the correct angle for installation
(23).
3
- Place the infant carrier onto the vehicle seat where you would like to install.
(24)
4
- Line up the ISOFIX connectors with the ISOFIX guides, and then click both
ISOFIX connectors into the ISOFIX anchor bars. (25)
Make sure that both ISOFIX connectors are securely attached to their
ISOFIX anchor bars. There should be two audible clicks and the colors of
the indicators on the both ISOFIX connectors should be completely green.
(25)-1
Check to make sure the child restraint is securely installed by pulling on
both ISOFIX connectors.
5
- Make sure the level line on the restraint label is as level as possible with the
ground. (26)
6
- To remove the infant carrier, squeeze the ISOFIX release button on the back
of infant carrier and pull the infant carrier away from the ISOFIX anchor
bars. (27)
7
- Rotate ISOFIX Connectors up to storage position, and click them into place.
Remove child restraint from the vehicle. (28)
Accessories
Post Adapters
The infant carrier can attach to Nuna strollers using adapters. Adapters are
included with Nuna strollers. (29)
Visit nunababy.com for more information.
Detach & Assemble Soft Goods
see images (30)-(44)
To re-assemble the soft goods, reverse the aforementioned steps.
10
PIPA urbn instructions
Cleaning and Maintenance
Clean the frame, plastic parts, and fabric with a damp cloth, but do not use
abrasives or bleach. Do not use silicon lubricants as they will attract dirt and
grime.
To ensure long-lasting use, wipe this product off with a soft, absorbent cloth
after using it in rainy weather.
Refer to the care labels attached to the soft goods for washing and drying
instructions.
It is normal for fabric to color from sunlight and to show wear and tear after a
long period of use, even when used normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If any parts are torn, broken, or
missing, stop using this product.
NUNA International B.V. Nuna and all associated logos are trademarks.
11
PIPA urbn instructions

Publicité

loading