Nuna Pipa Urbn Mode D'emploi page 10

WARNING
Failure to follow these warnings and instructions could result in
serious injury or death.
DO BE cautious that the rigid items and plastic parts of an enhanced
child restraint system shall be located and installed so that they are not
liable to become trapped by a movable seat or in a door of the vehicle
during everyday use of the vehicle.
Any straps restraining the child should be adjusted to the child's body,
and that straps should not be twisted.
To use this enhanced child restraint according to UN Regulation No.
129, your child must meet the following requirements:
Child height 40cm-75cm/Child weight≤13kg.
This enhanced child restraint should be replaced when it has been
subject to violent stresses in an accident.
Consider the danger of making any alterations or additions to the device
without approval of the Type Approval Authority, and a danger of not
following closely the installation instructions provided by the child
restraint manufacturer.
Please keep this enhanced child restraint away from sunlight, otherwise
it may be too hot for child's skin. Always touch the enhanced child
restraint before placing child in it.
DO NOT leave your baby unattended in the child restraint system.
Any luggage or other objects liable to cause injuries in the event of a
collision shall be properly secured.
The Enhanced Child Restraint System shall not be used without the
textile covers.
The Enhanced Child Restraint System cover should not be replaced
with any other than the ones recommended by the manufacturer,
because the cover constitutes an integral part of the restraint
performance.
Please also pay attention to the instructions and warnings in the vehicle
manufacturer's handbook.
DO NOT use the rearward facing enhanced child restraint systems in
seating positions where there is an active frontal airbag installed. Death
or serious injury may occur. Please reference vehicle owner's manual for
more information.
6
PIPA urbn instructions
Parts List
Make sure all parts are available before assembly. If any part is missing, please
contact local retailer. No tools are required for assembly.
1 Head support
2
Seat Pad
3 Shoulder Harness Straps
4 Infant Insert
5 Harness Adjustment Button
6 Adjustment Webbing
7 ISOFIX Connector
8 Safety Buckle
9 Quick Guide Pocket
10 Post Adapter Release Button
1
2
3
4
5
6
7
18
11 Canopy Mount
12 Canopy
13 Dream drape™ Zipper
14 Handle
15 Handle Adjustment Button
16 ISOFIX Release & Stroller
Release Button
17 Canopy Window
18 ISOFIX Guides
13
12
11
10
9
8
14
15
PIPA urbn instructions
17
16
7