Usb Memory; Basic Operations - Onkyo CS-375D Mode D'emploi

> Before Start > Part Names

USB Memory

1
2
14
> Install > Playback
You can play MP3 music files by connecting a USB
memory to the USB port on the front of the unit.
0 The supported sampling rates for MP3 files are 32
kHz to 48 kHz, and supported bitrates are between
32 kbps and 320 kbps and VBR.

Basic operations

Perform the following procedure when the unit is on.
1. Repeatedly press INPUT 2/1 on the remote
controller to switch input to USB.
2. Plug your USB memory into the USB port on the
front.
3. After reading is complete, use 3/4 (d) on the
remote controller to select the folder or file. If you
selected a folder, the content of the folder is
displayed when you press ENTER (f). To return to
the previous display, press
When you select a file and press ENTER (f) on the
remote controller, play starts.
0 Only the music files in the same level of the folder
are played.
4. Use play buttons (e) to stop play or choose tracks to
play. You can also select by entering the track
number with number buttons (a) and pressing
ENTER (f).
Also, by pressing (b), you can switch the display
in the order Track title/Artist name/Album name/
Track number in the folder, Elapsed play time/
Remaining play time.
0 ID3 version 1 (1.0 and 1.1) only is supported with
the title, artist name, and album name displays.
0 Characters that cannot be displayed by this unit
appear as "∫".
0 A maximum of 255 folders and 999 files can be
read. This includes folders that contain files this
unit cannot play.
a
b
d
g
(c).
Advanced Setup | Others
c
e
f
e
h