Publicité
Microcode update under DOS with bootable microcode update floppy disk - brief description
Ê
Download the update file from out website to your PC.
Ê
Insert an empty floppy disk (1.44 MB).
Ê
Run the update file under DOS (e.g. 1495101.EXE).
Ê
A bootable update floppy disk is created. Leave the floppy disk in the drive.
Ê
Restart the PC.
Ê
Follow the instructions on screen.
To determine whether the latest microcode update has been loaded, the so-called Patch-ID of the
processor can be read out.
Ê
Press the [F1] key in the BIOS Setup.
The entry CPU / Patch ID is shown on the displayed information page.
A list with the current processors and the related Patch-IDs is available on the Internet.
If the processor is not recognised, you also require the microcode update tool for
i
processors of the P6 family.
Drivers
Only when no drivers are installed on your system, or you want to update these, proceed as follows:
Ê
Insert the CD "Drivers & Utilities Collection" into the CD-ROM drive.
Ê
If the CD does not start automatically, run the START.EXE programme in the main directory of
the CD.
Ê
Select DeskUpdate - Fully automatic installation.
Ê
Follow the screen instructions.
A26361-D1555-Z121-2-6319
Drivers
English - 23
Publicité
