Publicité
Settings with switches and jumpers
Your mainboard is equipped with switches or jumpers. The positions of the switches or jumpers are
shown on page "Cover".
ON
1
i
The clock frequency of the processor is set automatically.
Skipping system and BIOS Setup password - switch 1 / pin pair 1
Switch 1 / pin pair 1 enables skipping the system and BIOS Setup password.
System and BIOS Setup password are skipped when the device is switched on and
On
may be changed.
System and BIOS Setup password must be entered when the device is switched on.
Off
Recovering System BIOS - switch 2 / pin pair 2
Switch 2 / pin pair 2 enables recovery of the old system BIOS after an attempt to update has failed.
To restore the old BIOS you need a Flash BIOS Diskette (see "BIOS update" chapter).
The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS-
On
Diskette" restores the System BIOS on the mainboard.
Off
Normal operation (default setting).
Reserved - switch 3 and switch 4 (if present)
Switch 3 and 4 are reserved. The position of the switch doesn't matter.
14 - English
1 2 3 4
2
Switch 1 = Skipping system and BIOS Setup
password
Switch 2 = System BIOS recovery
Switch 3 = must be set to off
Switch 4 = must be set to off
Pin pair 1 inserted =
Skipping system and BIOS Setup password
Pin pair 2 inserted =
System BIOS recovery
Any other setting =
State of supply; jumper has no function
A26361-D1555-Z121-2-6319
Publicité
