Publicité
External ports
Connecting loudspeakers
The number of loudspeakers connected should match the number of audio channels you select in
the driver software.
Using external audio connections
Depending on driver version and operating system the functions may differ from this
i
presentation. If necessary, further information is provided in the respective help system of
drivers and software.
Selecting settings for 2, 4 or 6-channel audio mode
Depending on the driver for the audio mode and from the operating system used, you can configure
the audio properties, e.g. with Windows 2000 under Start - Settings - Control Panel - Sounds and
Multimedia.
8 - English
Analogue 2-channel audio output
1
With the 2-channel configuration the functions
Line-Out, Line-In and MIC are available.
2
1 = Line-In (blue)
3
2 = Line-Out (front channels, green)
3 = MIC (red)
Analogue 4-channel audio output
Line-In is converted into the Rear-Out function
1
with the 4-channel configuration.
2
1 = Line-In (rear channels, blue)
3
2 = Line-Out (front channels, green)
3 = MIC (red)
Analogue 6-channel audio output
1
Line-In and MIC are converted into the function
Line-Out with the 6-channel configuration.
2
1 = Line-In (rear channels, blue)
3
2 = Line-Out (front channels, green)
3 = MIC (centre and subwoofer channel, red)
A26361-D1555-Z121-2-6319
Publicité
