Publicité
Les langues disponibles
Les langues disponibles
3.2 Operation
ATTENTION!
◊
Do not look into the laser output or shine the light into the eyes of
people or animals. This may damage the eyes.
◊
Make sure the laser is turned off before installing the product so
that the laser radiation does not turn on during installation.
1.
Inside the remote is a battery protected with plastic. Remove the
piece of plastic to activate the battery.
2.
Plug the EU connector into a wall outlet or the USB plug into the USB
port of a laptop or power bank.
3.
Point the remote control at the product. Make sure you stand with
the remote control no more than 5 meters away from the product.
Make sure there is nothing in the way between the remote control's
IR signal transmitter and the product's IR signal receiver.
4.
Press the on/off button on the remote control to turn on the
product.
5.
Press the buttons to activate the desired light effects (see "1.2
Product Overview"). Allow for a 1 second delay when switching to
another lighting program.
6.
Press the on/off button on the remote control to turn the product
off when you are done using it.
7.
Unplug the product and let it cool down before cleaning up.
English
37
Publicité
