Publicité
Les langues disponibles
Les langues disponibles
A screw that fits the bracket:
•
Length: min. 2.5 cm.
Diameter screw thread: max. 0.8 cm.
Diameter screw head: min. 1.1 cm.
A plug that fits the screw.
•
A screwdriver that fits the screw.
•
Optional: A ring to set between the screw head and the bracket.
•
Instructions:
1.
Mark out the hole on the wall/ceiling where you want to attach the
product.
2.
Drill the hole in the wall/ceiling. Be sure to take into consideration
the quality of the surface, the length of the screw and the diameter
of the plug.
3.
Fill the hole with a plug that fits.
4.
Attach the bracket to the wall/ceiling by screwing it tightly. Secure
the bracket.
5.
Attach the product to the bracket (see next steps).
Mounting the bracket to the product
1.
Place the bracket on the product,
with the 2 side holes of the bracket
sitting exactly on the 2 side holes
of the product.
2.
Turn the bolts in these holes
clockwise to secure the bracket to
the product.
36
Publicité
