Publicité
Les langues disponibles
Les langues disponibles
not come into contact with water. Do not immerse the product in
water. If water does get in or on the product, turn the product off
immediately and contact our customer service.
Do not use the product near objects or surfaces that are sensitive
•
to heat.
Do not use the product near water or flammable liquids.
•
Let the product cool down completely before cleaning or storing it.
•
Do not clean the product while it is still plugged in.
•
Do not place the product on (highly) flammable materials such as
•
tablecloths, curtains, towels or newspapers.
Do not place the product in areas subject to frequent shock or
•
vibration. This may result in tipping over and/or damage to the
product.
Make sure that the ventilation system is not blocked when the
•
product is on. This can lead to overheating. Keep at least 5 cm of
space around the ventilation grid.
Do not drop the product or subject it to large shocks.
•
Do not look directly into the lens when the product is on and/or in
•
use, the light may damage the eyes.
Do not use the product for more than 4 hours at a time.
•
2.4 Electronics
Make sure the laser is off before installing the product so that the
•
laser radiation does not turn on during installation.
If the power fails during use, turn off the product immediately and
•
unplug the power cord.
If the surface of the product is cracked, please turn off the product
•
to avoid electric shock.
Periodically inspect both power cord and plug for signs of damage
•
or wear, and if any, do not operate the product and have the
power cord and/or plug replaced or repaired by authorized service
personnel.
Use and store the product so that the cables cannot be damaged.
•
To avoid electric shock, do not use the product if you suspect that
•
the power cord or plug is damaged. A damaged power cord or
English
33
Publicité
