auronic AU3223 Manuel D'utilisation page 31

damaged, do not use the product and contact our customer
service.
Before each use, inspect the parts and accessories for damage or
•
wear (cracks/breaks) that could impair function and if so, replace
them with original parts and accessories recommended by the
manufacturer.
Do not use accessories not offered by the supplier. They may pose
•
a danger to the user and damage the product.
Use the product only for the purposes indicated in this manual.
•
Do not disassemble or repair the product. This may damage the
•
product. For your own safety, these parts should only be replaced
by authorized service personnel. Always send the product to the
service center for repairs to avoid damage and personal injury.
Be aware of the risks and consequences associated with incorrect
•
use of the product. Improper use of the product can lead to
personal injury and damage to the product.
Before first use, remove all packaging material and any stickers.
•
The exterior of the product may become hot when the product is in
•
use. So be careful when you touch the outside!
The product is only suitable for use indoors or shielded under a
•
canopy. Do not expose the product to wind or rain to prevent
damage to the product and personal injury.
The product can only be operated by means of the remote control.
•
Keep the product away from heat, areas where the temperature is
•
relatively high and heat sources such as ovens.
Keep the product away from open flames, lit cigarettes and other
•
heat sources and/or hot surfaces.
Keep the product away from sharp and pointed objects that may
•
damage the material.
Place the product at least 1 meter away from flammable
•
substances, such as textiles, plastics, electrical appliances, wood,
etc.
Do not place the product too close to the edge of a surface and
•
make sure the product does not fall over.
Do not block the light beam projected by the product, this can lead
•
to overheating or personal injury.
Make sure the product does not get wet.
•
English
31