Fora TN'G Manuel De L'utilisateur page 31

BATTERY RECHARGE
Your meter comes with a built-in rechargeable Li-polymer battery. If
the low battery symbol "
battery is low and it is time to recharge the battery. We advise you to fully
recharge every 9 months when not in-used to ensure best condition.
1. Connect the USB cable to the data port of the meter.
2. Connect the other end of cable to a free USB port on your personal
computer.
3. "USb" will appear on the display and the charging indicator will light up
in red when battery is recharging. After the battery is fully charged, the
red light will turn green.
4. Remove the USB cable and the meter will automatically switch off.
NOTE :
• Meters may not be rechargeable if recharging is not performed over 9 months.
• It should take approximately 2 hours to be fully recharged. Recharging the
battery does not affect the test results stored in the memory.
• The USB cable is for battery recharging and data transmission with a
computer. If you wish to recharge through a wall outlet, please obtain a USB
adapter.
Meter Storage:
Storage conditions: -20 ° C to 60 ° C, below 95% relative humidity.
● Always store or transport the meter in its original storage case.
● Avoid dropping and heavy impact.
● Avoid direct sunlight and high humidity.
Caring for Your Test Strips
● Storage conditions: 2 ° C to 32 ° C, below 85% relative humidity. Do NOT
freeze.
" appears on the screen indicating that the
31