Fora TN'G Manuel De L'utilisateur page 26

DOWNLOADING RESULTS
Data Transmission via Bluetooth
You can use your device with iOS or Android system to download data
from your meter via Bluetooth. Follow the steps below to transmit data
from your meter. Please contact local customer service or place of
purchase for assistance.
Please note that you must complete the pairing between meter and
Bluetooth receiver before transmitting data.
1. Make sure your meter is already paired with your device with iOS or
Android system by following instructions of the setting mode in
Step 6.
2. Install the software on your device with iOS or Android system.
3. Data transmission
Turn on the Bluetooth on your device with iOS or Android system and
keep it on, and your meter will be able to connect to the device after
measurement. You can view the data on your device.
Bluetooth indicator on the meter
BLUETOOTH INDICATOR
Flashing Blue
Solid Blue
NOTE
• While the meter is in transmission mode, it will be unable to perform a test.
• Make sure your iOS (6 or above) or Android system (4.3 or above) device has
its Bluetooth enabled and your meter is within receiving range before you
transmit data from your meter.
• A compatibility issue between your mobile device and the meter might occur
due to the way Bluetooth functionality is implemented by the various mobile
device manufacturers.
• The USB port of the meter is only for battery recharge. It does not have the
function of data transmission.
26
The Bluetooth function is enabled and waiting for
connection.
The Bluetooth connection is established.
STATUS