Blue Sky Outdoor Living OKC1322PTS Manuel Du Propriétaire page 7

With your pull out accessory in its desired location make sure that the pull
out tray and or trash system does not interfere with the closing of the cabinet
door and that the tray and or trash system can slide in and out.
Once the location is confirmed, with a pencil mark the location of the support
base onto the cabinet base.
Now that the location of the support base is marked on your cabinet base it is
time to remove the support base from the Pull Out Tray or Trash Bin(remove
trash bins before the next step). Removing the support base is easier with
two people. Pull out the tray or trash system from the support base enough
to fully extend the slides. Push up on the black release lever on one side of
the inner slide, while pushing down on the black release lever on the other
side of the tray or trash system. While holding the levers in these positions,
pull the tray outward, until it is released from the base.
With the tray or trash system separated from the support base, align the
support base to the pencil marks you previously made onto the cabinet base.
Now that the support base is properly aligned, use a pencil to mark the center
7 | www.bluesk youtdoorliving.com