Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
TOOLS REQUIRED FOR ASSEMBLY
Included:
Hex key
Drill Bit
CABINET AND TOP SOLD SEPARATELY
After assembling cabinet and top per instructions, install the Pull Out Accessory
using the installation instructions below.
Before you install the Pull Out Accessory make sure to remove contents of
cabinet and shelves. Use your cabinet manual for shelf removal and reinstallation
instructions.
PULL OUT TRASH SYSTEM ASSEMBLY
Place handle (D) around the front of the inside tray of the Pull Out Trash System
(A) making sure the handle top angles away from the tray. Use four M6 bolts (G) to
attach the handle from the inside of the tray. Finger tighten the bolts in place. Then
tighten all the bolts using the hex key provided.
With the Pull Out Trash Bin Assembled loosen the eight bolts, two on each
side of the sliding supports with the provided hex key. Place your trash
bins(not included) into the Pull Out Trash System and adjust the sliding
5 | www.bluesk youtdoorliving.com
Not Included:
Pencil
Center Punch
Hammer
Drill
Publicité
