Blue Sky Outdoor Living OKC1322PTS Manuel Du Propriétaire page 10

Line up the 4 large holes on the support base with the threaded inserts you
just screwed into your cabinet base, making sure the slides of the support
base face the front of the cabinet. Using the provided hex key screw four M5
bolts (F) through the support base and into the threaded inserts to secure
the support base to the cabinet base.
To install the tray of trash system back into the support base, extend the ball
bearing slides in the support base, so they stick out beyond the front edge of
the cabinet. Lift the tray or trash system into position so that the inner slides
(attached to the tray or trash system) line up with the ball bearing slides inside
the support base. Make sure they are seated properly. Then slide the tray into
place. You should hear a small click when the slides are engaged. Close fully
(the first time will require a firm closing) and then pull open to make sure they
are properly engaged. The tray or trash system should not pull completely
out.
Note: Pull Out Tray and Pull Out Trash System can hold a Maximum of 40 lbs
(18.14 kg).
10 | www.bluesk youtdoorliving.com