Removing The Protection - Toshiba PDR-M60 Mode D'emploi

Protecting Images (continued)

Removing the Protection

Carry out steps 1 to 3 in "Protecting An Image".
Use the or buttons to select the image to
PROTECT
unprotect, and press the ENTER button.
This fixes the images whose protection is to be removed, and [ ]
under the image changes to [ ].
To unprotect an image, press the ENTER button again.
To remove the protection from two or more images, repeat this
procedure for the necessary number of images.
CANCEL
EXEC
Carry out step 5 in "Protecting An Image".
Memo
• To protect an image again, write-protection is simultaneously carried out if set at step 2.
- 78 -